Switches

PUMP PROTECTION SWITCH - Part# RCNO2020
FSRD Float Switch Run Dry Protection
Floating switch (normally open) to switch off the pump at low water (run dry protection). May be installed at the inlet hose or at the submersible pump. The floating switch starts the pump at the minimum level in the cistern. Switch lever and fastening clamp (for hose diameter of 100-140 mm) of stainless-steel. Float housing (red) of polyethylene with flexible switching control 3 x 1 mm² (without intermediate plug).

FSWF Float Switch Water Feed - Part# RCNC2525
The floating (normally closed) switch controls the backup water feed. May be installed at the inlet hose or at the submersible pump. Switch lever defines exact switching points to supplement water demands with a backup water source when rainwater supply diminishes. Switch lever and fastening clamp (hose diameter 100-140 mm) of stainless-steel. Float housing (yellow) of polyethylene with a flexible switching control 3 x 1 mm² (without intermediate plug).

Multisiphon Overflow - Part# RCUS1002
Connects to the overflow pipe. Effectively removes surface debris through its skimming effect. Prevents the entry of drain smells into the cistern. Protects cistern with backflow prevention and vermin protection.

Wireless Level Sensor - Part# RCS207E
Wireless sensor that gives remote tank level readings by pressing a button on a desktop unit. Sensor has an operating range of 984 to 1600 feet. The maximum detection depth is 10 feet. Sensor and bench unit operate on four “AA” batteries. Sensor can be mounted within minutes. Can be installed on a slope with its adjustable transponder. Suitable for tanks/cisterns made from plastic, tin, wood, concrete and any other materials.